Guitar Rod Piezo Harness with Volume & Long-Shaft Phone Jack - NO SOLDER
This is a pre-wired rod piezo harness for guitar that includes a volume pot and Neutrik long-shaft mono output jack. Installation of this harness requires NO SOLDERING - all you have to do is drill some holes, connect the plugs and you're good to go! The rod piezo is intended for a standard 6-string acoustic guitar, and has six "piezo pads" on it. We also carry a similar harness that includes a ukulele rod piezo intended for 4-string instruments (product number 50-063-01).
This harness includes 12" leads between the components so that you have plenty of slack to install them how you want in your box. The volume control is a 500KOhm audio-taper potentiometer. Please note that rod piezos are designed to be placed underneath the bone/plastic saddle on a standard acoustic guitar, where they are exposed to the downward pressure created by the strings. The closer you can get to using them in this way, the better results you will have!
Pop this little harness in your acoustic guitar, cigar box guitar or other stringed instrument and get ready for some great sound!