Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!

SKU:
90-044-01
UPC:
602589220352
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
  • Adjustable Wall Hanger Mount Kit for Cigar Box Guitars - Handles most tuner alignments!
$7.99

Description

Ever struggled to find a way to hang a narrow-headstock CBG on the wall? Now there's a safe and effective way!

Crafted from 1/4" Arctic birch plywood, this adjustable wall-hanger kit is designed to offer a comfortable place to hang your cigar box guitar. The dimensions are 3 1/4" wide x 5" tall x 3 1/8" deep. It mounts to the wall with screws through two holes (screws not included). The kit quickly and easily assembles with no tools or glue required (just screws and a screwdriver to mount it to a wall). 

Assembly how-to sheet with photos included to help you get it put together. View the full assembly guide here.

The two support hook sides of this hanger can be cafefully adjusted up and down into cut notches, allowing it to adequately support various 1 1/2" wide headstock configurations - 2 left / 1 Right, 2 Right / 1 Left, 2L / 2R and more. You can also use this with extended headstock instruments, though if the guitar is too heavy it may bend the support hooks outward. This is really intended for lighter (4 pounds or less) cigar box guitars.

PLEASE NOTE: Assembling this kit and adjusting the hanger hooks requires a gentle touch. Too much torque or force will break the plywood. If it is already mounted to the wall, we recommend removing it from the wall before adjusting the hanger hooks.

This is a laser-cut product. One side of the cut panels will have some darkening/staining left over from the cutting process. These spots should be sanded off if so desired.

 

 


 

View AllClose