This is a set of 24 classic-style shiny nickel finish metal press-fit tuner bushings, made to fit over a standard 6mm (.235") tuner shaft. These are great for new instrument work, but may not fit well into an existing bushing hole, if you are doing repair work. Be sure to check the size specs below to make sure these will suit your purposes!
These bushings have the following dimensions:
- Outside Diameter of Lip: 11mm
- Outside Diameter of Shaft (the part that gets pressed into the wood): 8.2mm
- Inside Diameter: 6.2mm
- Overall Height: 7.2mm