Antique Brass 3-string Hard-tail Bridge for Cigar Box Guitars & More

This is an electric guitar-style hard-tail bridge, but made for 3-string cigar box guitars! It has a beautiful antique brass finish, sure to look great on your next special build.

These bridges are drilled for both "top-loading" and "bottom-loading" styles, which means that the strings can either be fed through the back plate of the bridge, then up and over the saddles OR up through the body of the instrument.

Check out this free how-to article on CigarBoxGuitar.com for more info on how to use this bridge.

The dimensions of these bridges are 1 31/32" (50mm) wide, 1 5/8" (41mm) deep and about 9/16" (14mm) tall. Spacing between strings is 12mm (0.472", just under 1/2") with total distance from string 1 to string 3 being 24mm or 0.945" - just under 1 inch. Each one is mounted securely by four screws, and a small allen wrench is also included for adjusting the small set screws that control string action height. See the listing photo with measurements (in millimeters) for more size specs. Make sure that you pre-drill the holes for the mounting screws, as it is possible to twist the heads off otherwise.