C. B. Gitty Publishing
5-pack Clear Peel & Stick Fretboard Decals - 25-inch Scale
Marking your slide cigar box guitar neck with fret locations has never been easier. Just peel off the backing, snug the front edge up against your nut, and push it down onto the neck. Voila, you've got 25-inch scale fret markings on your neck/fretboard.
This is a set of five (5) individual decals, allowing you to add fretboard markings to five necks/instruments. They are printed on weatherproof outdoor-grade clear polyester sheet, and cut to a perfect size for standard 1 1/2" wide cigar box guitar necks. The exact measurements of these decals is 1 3/8" wide by 16 1/4" long. The decals have a glossy sheen to them, and are crystal clear to let the wood grain of your neck show through. Key fret positions are marked with black circles.
Please note that this decal includes 18 frets - the total length was limited by the length of the sheets we print them on. These decals are very durable with a strong permanent adhesive. Make sure the surface of your neck is smooth, clean and grease-free before applying. As with any adhesive decal, if you pick at the corners they will come back up, so be careful about that. Also as with any decal, if you scratch the surface with something sharp, the printing will scrape off. In our testing though it is very durable and stands up well to guitar picks and fingernails.
Please note: These decals are intended for unfretted, slide instruments. Due to slight variations in how our printer handles image scaling, these exact scale length of these decals may be very slightly less than 25 inches. This won't affect the intonation of your instrument, but it does mean that the fret marks might not precisely match up with other templates you have. Please purchase one of our actual fretting templates if you want to have an exact guide.
The neck shown in the listing photos is for demonstration purposes only and is not included in this offer.