Guitar & Instrument Parts

This is a pack of twelve bone nut blanks perfect for cigar box guitars and other homemade instruments. Here are the dimension: Length: 1.536" (39mm) Height: 0.350" (9mm) Thickness: 0.195" (5mm) These nut blanks are made from cow bone and are...

These tuners are an affordable option for Cigar Box Guitar builders on a budget.A 4pc. set of  Open Gear guitar tuners intended for 4-string Cigar Box Guitars, set up for "2 Right/2 Left" configuration on the headstock. Note that the "left" and...

Select your desired wood type and fretting options above. These custom, American-made fretboards are designed specifically for use on cigar box guitars with necks 1 1/2" wide. The fretboard is 20 3/8" long, 1/4" thick and has 20 frets, spaced for a 23"...

This is a set of two handcrafted cigar box guitar bridges, made from beautiful (and expensive!) zebrawood. These are perfect for 3 and 4-string cigar box guitars, and can be customized with string grooves for any configuration. These are made in the U.S...

This is a pack of twelve (12) nice gold strap buttons, with matching screws and felt pads for mounting them to your favorite guitar. These buttons add a convenient place to attach a standard guitar strap, and can be placed at the very bottom of the...

Perhaps the most important aspects in headstock construction, is getting the proper break angle for the strings to get to the nut. One of the easiest ways to do this is with a string retainer bar like this one. These bars are 1.65 inches / 42mm in...

This is a 6pc set of beautiful Chrome sealed-gear guitar tuners, set up for "6-in-a-line" configuration such as is seen on Fender Strat(R) and Telecaster(R) electric guitars. The buttons of these tuners are the vintage "tombstone" shape, such as is...

Great for new instrument fret-work and repair work on mandolins, banjos, dulcimers, cigar box guitars and more! This fret wire is similar to Stewart-MacDonald's Narrow/Low #764, with an even lower crown height perfect for smaller instruments...

This is a 6pc set of gold-plated enclosed-gear guitar tuners, with three left-aligned and three right-aligned. These are beautiful tuners and make a distinctive finishing touch for your special build - and they go especially well with our gold fret wire!...

This is a shorter rod piezo originally intended for use with 4-string ukuleles, but they are also GREAT for cigar box guitars! These rod piezos have 4 separate piezo wafers, instead of the 6 that are found on standard guitar rod piezos, so they can be...

This is a pack of two general-usage capacitors, rated at 0.010 microfarads. These capacitors are great for incorporating into guitar tone circuits, amplifier circuits and more! Please note that we do not include instructions or how-to along with these,...

These 4-string tailpieces were engineered specifically for use on 4-string cigar box guitars. Designed and manufactured in the USA, these special parts would be a great addition to your next special instrument build. They measure 1 15/16" (widest point)...