Guitar & Instrument Parts

People have been asking for these for YEARS, and now we finally have them: a shorter rod piezo designed specifically for use with 3-string cigar box guitars! These rod piezos have 3 separate piezo wafers, instead of the 6 that are found on standard...

This is a pack of two general-usage film capacitors, rated at 0.047 microfarads. These capacitors are great for incorporating into guitar tone circuits, amplifier circuits and more! Please note that we do not include instructions or how-to along with...

This is a pack of 2 Bourns 500K audio-taper potentiometers, perfect for use as volume controls in guitars, cigar box guitars, and more. These pots include a washer and nut for mounting. These are high-quality pots that will last a very long time, and...

This is a 12-pack of 1/4" Neutrik brand mono phone jacks, with a 9.5mm-long threaded shaft and fastontabs. These jacks are perfect for all sorts of electric guitars, cigar box guitars, and general audio usage. These are not cheap, chintzy jacks...

This is a set of 25 short-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decoration. The diameter of the top flange is 0.2", and the shank length under the...

This is a decorative chrome-plated tailpiece, designed for use on a mandolin, but also perfect for a cigar box guitar! As shown in the photo above, beneath the removable faceplate cover are pegs meant for loop-end mandolin strings. But a CBG builder...

This is a laser-cut biscuit bridge designed specifically for use on the Charles Atchison 5.5-inch "Lightning" resonator cones that we sell. These are the acoustic version of the biscuit bridge with no embedded pickup. They are 1 1/2" in diameter and...

From the era of big hair and spandex, these screaming single coils are voiced for just about anything you throw at 'em.  Crystalline highs, shimmering chords and Jimi leads all from one pickup. This set includes the pickup, which has a 13"...

  Classic six-string single coil in a 100% pre-wired setup at an insanely low price.  Volume, tone and guitar jack included.   No soldering.  No guesswork.  Just tone for days...   Scroll down for free installation...

This pre-wired 6-string magnetic pickup harness is ready to mount in your guitar, cigar box guitar or other stringed instrument without any need to solder or worry about wiring schematics. This harness features a white 6-pole single coil pickup with a...

This is a set of two black plastic potentiometer knobs, in the classic "chickenhead" pointer design. These knobs include a set screw and are intended for use on shafts that have a flattened area for best results. You may need to file a flat are into a...

This is a six-pack of economy long-shaft 500KOhm pots, perfect for use as volume controls in a guitar, amp or cigar box guitar! As you can see from the photo to the left, these are narrow-profile pots with a 15mm base. The extra-long shafts on these...