"Fire Chief" Vintage Cigar Box Art Limited Edition Acoustic Wooden Box Kit - 8.5 x 11in. "Fire Chief" Vintage Cigar Box Art Limited Edition Acoustic Wooden Box Kit - 8.5 x 11in. "Fire Chief" Vintage Cigar Box Art Limited Edition Acoustic Wooden Box Kit - 8.5 x 11in.


"Fire Chief" Vintage Cigar Box Art Limited Edition Acoustic Wooden Box Kit - 8.5 x 11in.

C. B. Gitty $19.99

This is a special limited-time edition (#7) of our most popular box kit. The top panel of the kit (the soundboard) has been cut with Stradivarius-style F-holes and printed with a beautiful rustic design using our unique "rustic-o-graphic" process. Every two weeks we will retire the design and introduce a new one.

This is a simple kit for easily constructing a 8.5 x 11" plywood box, perfect for building cigar box guitars and other homemade instruments. We designed this box kit with box/finger joints, an exceedingly strong joint that is commonly used in the construction of cigar boxes. The top and bottom are 1/8" Arctic Birch ply, and the sides are 1/4" natural birch ply. These boxes are a little more involved than some of our other box kits, but the payoff is worth it. The outside dimensions of the box are 8.5" x 11" x 2 1/2" (21.59cm x 27.94cm x 6.35cm). This birch plywood stains, paints and finishes very nicely.

This kit is Made in the USA from a combination of U. S.-made and Canadian-made plywood, hand-selected for quality. We can print these for either right-handed or left-handed guitars - please specify in your order notes if you want left-handed (there may be a few days of lead time for left-handed requests)! If you order just the printed top panel, we will send you just the printed 8.5 x 11-inch 1/8" piece without the rest of the box kit.

Please note: this is a laser-cut product. One side of the cut panels will have some darkening/staining left over from the cutting process. These spots can be sanded off if desired, or simply kept on the inside of the box, so they are not visible. Some sanding is recommended to smooth over edges. Glue is not supplied with this kit, nor is sandpaper. This style of box is not designed to be hinged/openable, due to the thinness of the top panel. The top is intended to be glued in place during construction of a musical instrument or other project. Screwing the parts together should not be necessary, and no pre-cut/drilled holes are included in the pieces. The pieces may have some slight warp to them, but once the box is assembled and glued together, care should be taken to ensure that there is no significant warpage to any key parts. Some additional interior bracing may be necessary to utilize this box as the body of a stringed instrument.

Read more
Order just the custom-printed top panel?
Add to wishlist

Description

This is a special limited-time edition (#7) of our most popular box kit. The top panel of the kit (the soundboard) has been cut with Stradivarius-style F-holes and printed with a beautiful rustic design using our unique "rustic-o-graphic" process. Every two weeks we will retire the design and introduce a new one.

This is a simple kit for easily constructing a 8.5 x 11" plywood box, perfect for building cigar box guitars and other homemade instruments. We designed this box kit with box/finger joints, an exceedingly strong joint that is commonly used in the construction of cigar boxes. The top and bottom are 1/8" Arctic Birch ply, and the sides are 1/4" natural birch ply. These boxes are a little more involved than some of our other box kits, but the payoff is worth it. The outside dimensions of the box are 8.5" x 11" x 2 1/2" (21.59cm x 27.94cm x 6.35cm). This birch plywood stains, paints and finishes very nicely.

This kit is Made in the USA from a combination of U. S.-made and Canadian-made plywood, hand-selected for quality. We can print these for either right-handed or left-handed guitars - please specify in your order notes if you want left-handed (there may be a few days of lead time for left-handed requests)! If you order just the printed top panel, we will send you just the printed 8.5 x 11-inch 1/8" piece without the rest of the box kit.

Please note: this is a laser-cut product. One side of the cut panels will have some darkening/staining left over from the cutting process. These spots can be sanded off if desired, or simply kept on the inside of the box, so they are not visible. Some sanding is recommended to smooth over edges. Glue is not supplied with this kit, nor is sandpaper. This style of box is not designed to be hinged/openable, due to the thinness of the top panel. The top is intended to be glued in place during construction of a musical instrument or other project. Screwing the parts together should not be necessary, and no pre-cut/drilled holes are included in the pieces. The pieces may have some slight warp to them, but once the box is assembled and glued together, care should be taken to ensure that there is no significant warpage to any key parts. Some additional interior bracing may be necessary to utilize this box as the body of a stringed instrument.

Additional info

SKU: 65-010-08
UPC: 602589224077
Width: 12.00
Height: 9.00
Depth: 0.75