null

6pc. Chrome Screw-Mount Stereo Endpin/Strap Button Jack

SKU:
50-046-02
UPC:
610373921347
MPN:
50-046-02

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 5 - 9 and get $2.00 off
Buy 10 or above and get $4.00 off
  • 6pc. Chrome Screw-Mount Stereo Endpin/Strap Button Jack
  • 6pc. Chrome Screw-Mount Stereo Endpin/Strap Button Jack
  • 6pc. Chrome Screw-Mount Stereo Endpin/Strap Button Jack
  • 6pc. Chrome Screw-Mount Stereo Endpin/Strap Button Jack
$26.99
Frequently bought together:

Description

This is a set of 6 chrome-plated endpin/strap button stereo jacks, great for use on standard acoustic guitars as well as cigar box guitars and other instruments. These jacks are mounted with 3 chrome screws (included), with no nuts to tighten on the inside of the instrument. This allows them to be easily used on finished guitars where it would be hard to get a nut screwed on.

An endpin strap button jack serves a dual purpose: not only is it a standard 1/4" stereo guitar output jack, but it also is a handy place to attach your guitar strap. The standard place to mount these is the very base of the guitar (where a regular strap button can usually be found).

We also offer endpin/strap-button jacks in two other styles: both a threaded-shaft model that requires a nut to be tightened inside the instrument, as well as a "friction mount" model that seats firmly into a precisely sized hole in the body of the guitar.

Installation of these as a mono jack will require the ground wire to be soldered onto the extended prong, and the positive to be wired the smallest of the two terminals on the underside of the jack.

Please see the photos above for sizing reference on this item.

View AllClose