3-string Gold Hard-tail Bridge for Cigar Box Guitars & More

This is a gold-plated electric guitar-style hard-tail bridge, but made for 3-string cigar box guitars! It took us a long time to find a source for these, but now we got 'em!

These bridges are "top-loading" style, which means that the strings are fed through the back plate of the bridge, then up and over the saddles. No drilling through the instrument/box is required!

Check out this free how-to article on CigarBoxGuitar.com for more info on how to use this bridge.

The dimensions of these bridges are 1 31/32" (50mm) wide, 1 5/8" (41mm) deep and about 9/16" (14mm) tall. Spacing between strings is 12mm (0.472", just under 1/2") with total distance from string 1 to string 3 being 24mm or 0.945" - just under 1 inch. Each one is mounted securely by four screws, and a small allen wrench is also included for adjusting the small set screws that control string action height. See the listing photo with measurements (in millimeters) for more size specs.

We've been getting reports that the screws that come with these are farly easy to twist the heads off of - we're looking for a stronger screw, but in the mean time just be careful and make sure you pre-drill!