Fretting Tools & Templates

Presenting our second-generation “GEN2” line of plastic fretting templates! A huge improvement over the original model, these templates are ¼ the thickness, include more template features, are nice and flexible, and best of all are...

This is a high-quality dovetail-style saw, perfect for cutting fret slots for standard fret wires that fit in a .023" slot. The blade has a .020" kerf and is 8" long with a steel reinforced ridge along the top - much like the more expensive fretting saws...

Choose from four different options for these handy fretting scale length templates! Each template contains four separate fretboard templates showing fret placement for different ranges of scale lengths, from the shortest (soprano ukulele and mandolin at...

Finally, a low-cost, professional solution to achieving nice, straight fret slots! This miter box kit was designed by Ben "C. B. Gitty" Baker specifically to make it easy to cut nice, straight slots in your 1 1/2" wide cigar box guitar necks and...

 The All-In-One Fretting Starter Kit:  Everything you need to set up your own fretting station in your shop! We've had many customers ask us for an all-in-one setup for fretting instruments, and we've put together a great deal that will save...

We've finally found a source for a decent luthier's file designed for dressing and rounding frets after installation. A two-sided file, this tool will help make the shaping of your frets a much easier task at a much lower price than other similar tools...

Finally, an affordable tool for cutting the ends of frets close to the fretboard. We've been searching for a long time for a tool like this and we're excited to offer it to all of the builders out there at a great price! These specially made nippers are...

This easy-to use tool helps take the guesswork out of leveling your frets! Each tool has four flat edges of different lengths. Place one of these flat edges over three frets on your fretboard and rock it back and forth. If you feel some rocking, then...

Finally, a low-cost, professional solution to achieving nice, straight fret slots! This miter box kit was designed by Ben "C. B. Gitty" Baker specifically to make it easy to cut nice, straight slots in larger (up to 2 1/2" wide) guitar necks and...

These protector guards are perfect for helping to keep your fret board safe and unmarked while you file and polish individual frets ends. They are very thin and flexible stainless steel, so that they can be bent to straddle the fret ends to let you fully...

A C. B. Gitty original, designed specifically for cigar box guitar builders! The miter box created from this kit allows you to cut perfect fret slots in your cigar box guitar necks and fretboards. Only a screwdriver is needed for assembly (no glue...

This light hammer is fitted with two grades of tips - one hard rubber, and one hard plastic. Each tip threads into the handle so you can adjust the weight or simply use one side.The more forgiving rubber is perfect for tapping in frets or other pieces...