Resonator Parts

These screened chrome sound hole inserts are perfect for cigar box guitars and other homemade instruments. Originally intended for resonator guitars and dobros, they are 2 3/8" outside diameter and fit in a 1 7/8" hole. The flange depth (the part...

  The ultimate DIY instrument resonator cone! More "dobro-esque" tones than cookie tins or standard paint can lids. Easier to mount than traditional resonator cones. Made from American paint can lids and hand-spun at Gitty Workshop in New...

These screened gold sound hole inserts are perfect for cigar box guitars and other homemade instruments. Originally intended for resonator guitars and dobros, they are 2 3/8" outside diameter and fit in a 1 7/8" hole. The flange depth (the part that goes...

This is a laser-cut biscuit bridge designed specifically for use on the Charles Atchison 5.5-inch "Lightning" resonator cones that we sell. These are the acoustic version of the biscuit bridge with no embedded pickup. They are 1 1/2" in diameter and...

These shiny Black screened sound hole inserts are perfect for cigar box guitars and other homemade instruments. Originally intended for resonator guitars and dobros, they are 2 3/8" outside diameter and fit in a 1 7/8" hole. The flange depth (the part...

What better to use as a resonator in a cigar box guitar than a repurposed paint can lid?  Not only does it deliver the convincing metallic dobro sound, but it's also thin enough to be used on almost any build.  No deep routing is...

These resonator cover plates are cut from .040-inch (around 19-gauge) thick aluminum and are designed and manufactured in the USA. We designed these covers to fit our 5.25-inch and 6-inch "Hubcap" paint can lid resonator cones, using our special...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

This is a pair of real reclaimed/recycled Mississippi license plates, perfect for use on a homemade cigar box guitar or license plate guitar, or other craft project! These plates feature the "Birthplace of America's Music" design that has a nice guitar...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

This is an 8-pack of screened chrome sound hole inserts, perfect for cigar box guitars and other homemade instruments. Originally intended for resonator guitars and dobros, they are 2 3/8" outside diameter and fit in a 1 7/8" hole. The flange depth...

This is a cover plate/biscuit bridge set, laser cut from solid padauk, meant for use with the 5.5-inch "Lightning" resonator cones by Charles Atchison. Cover Plate: Cut from solid 1/8" thick padauk panels, and laser-cut & engraved with a nice radial...