Piezo Rods

This is a stereo chrome-plated end pin/strap button jack perfect for use in guitars, cigar box guitars, and many other instrument and audio projects. This jack is intended to be mounted through the base of a hollow-body acoustic or acoustic/electric...

This is a flat rod piezo designed for use with violins. Designed to rest in a plastic channel (included) with the wooden violin bridge placed over top of it. These can be used with the included mounting bracket and screws, with a saddle placed over top...

People have been asking for these for YEARS, and now we finally have them: a shorter rod piezo designed specifically for use with 3-string cigar box guitars! These rod piezos have 3 separate piezo wafers, instead of the 6 that are found on standard...

This is a shorter rod piezo originally intended for use with 4-string ukuleles, but they are also GREAT for cigar box guitars! These rod piezos have 4 separate piezo wafers, instead of the 6 that are found on standard guitar rod piezos, so they can be...

Are you (and your instruments) ready to graduate from piezo disk pickups?   This is a rod-style piezo, made to be installed beneath the saddle of a standard acoustic guitar as a pickup device. These also work GREAT as pickups in Cigar Box Guitars...

What could be easier than installing this pre-soldered "plug and play" ukulele rod piezo pickup harness into your ukulele, Cigar Box Guitar or other home-made instrument? We have designed these harnesses to be as absolutely easy to install as possible...

 What could be easier than installing this pre-soldered "plug and play" guitar rod piezo pickup harness into your acoustic guitar, Cigar Box Guitar or other home-made instrument? We have designed these harnesses to be as absolutely easy to...

This is a pack of 10 shorter rod piezos originally intended for use with 4-string ukuleles, but they are also GREAT for cigar box guitars! These rod piezos have 4 separate piezo wafers, instead of the 6 that are found on standard guitar rod piezos, so...

This is a pre-wired rod piezo harness for guitar that includes a volume pot and Neutrik long-shaft mono output jack. Installation of this harness requires NO SOLDERING - all you have to do is drill some holes, connect the plugs and you're good to go! The...

This is a flexible cable-style piezo pickup for acoustic guitars and other stringed instruments. This is an entirely different style of piezo than the more common disks or rigid rods, and consists of a long flexible piezo element inside a copper sheath...

This is a pre-wired rod piezo harness for guitar that includes a volume pot and Neutrik long-shaft mono output jack. Installation of this harness requires NO SOLDERING - all you have to do is drill some holes, connect the plugs and you're good to go! The...

This is a 10-pack of flat rod piezos designed for use with violins. Designed to rest in a plastic channel (included) with the wooden violin bridge placed over top of it. These can be used with the included mounting bracket and screws, with a saddle...

This is a bulk pack of our rod piezos, so you can get them at a better price if you need a lot of them. These rod piezos come with a 2.5mm plug at the end of a 12 1/2" braided lead. You can either cut the plug off and solder the lead direct to your jack,...

People have been asking for these for YEARS, and now we finally have them: a shorter rod piezo designed specifically for use with 3-string cigar box guitars! Each of these ten (10) rod piezos have 3 separate piezo wafers, instead of the 6 that are found...

This is a pre-wired rod piezo harness for ukulele, cigar box guitar and tenor guitar that includes a volume pot and a high-quality Neutrik chrome end pin strap button output jack. Installation of this harness requires NO SOLDERING - all you have to do is...