Amp Parts

These external-mount 9-volt battery trays are perfect for custom amplifiers, cigar box guitars with pre-amps or active circuits, and other electronics usage! Trays such as this make it possible to change batteries without opening up the enclosure, which...

These metal clips were designed for mounting 9-volt batteries in electronics projects and enclosures. They can be mounted in various ways, including gluing, screwing or even pop-riveting if you enlarge the holes a bit. these hold a standard 9-volt...

This is a set of two (2) 3-inch, 20-watt full-range amp speakers, perfect for use in homemade amplifier building - the same ones we include in our amp kits and use in most of the amplifiers we build here at C. B. Gitty.    Product...

This is a set of two (2) paper-cone audio speakers, rated at 3 watts and 8 ohm resistance. While not full range, these are good inexpensive workhorse speakers for various audio projects, including cigar box amplifiers. Their low profile (just over 1 inch...

A set of five 1/4" audio jacks, with 4 contact lugs. These are stereo jacks and also have a cut-off circuit, which allows them to be used in situations where you want a circuit to only be powered when a plug is inserted - this is commonly used for...

These cute little tweeters make a great addition to homemade amps, for pulling out those high-ends. They are rated at 13 watts and with 6 ohms impedance. They come with standard 1/8-inch blade-style solder lugs for easy wiring, and also have a third lug...

A set of two mini full-range mylar-cone speakers. These are 2 inches in diameter, and perfect for use in homemade amplifier building. This is the same style of speakers used in the famous "Smokey" cigarette pack amps, and can be used with our SDA-T amp...