Craft Parts & Hardware

This is a two-pack of 5/16" x 1 1/2" black steel threaded rod, perfect for use as basic cigar box guitar nuts and bridges. If needed, the grooves that you intend to run your strings through can be deepened a bit using a hacksaw, if the strings have...

This is a pack of 100 small silver round-head Philips screws. The nominal size is #2 x 3/8", with a fairly small head. From the manufacturer they measure 2mm x 8mm, but measure in a little smaller than that. This is the same style of screw used with many...

This is a twelve-pack of 5/15" x 1 1/2" black steel threaded rod, perfect for use as basic cigar box guitar nuts and bridges. If needed, the grooves that you intend to run your strings through can be deepened a bit using a hacksaw, if the strings...

This is a two-pack of antique brass finish metal cigar box guitar neck braces, with included screws. These braces are a great decorative and sturdy way to attach your neck to the box, and can help reduce neck bowing.  The included screws match...

This is a pack of 100 #2 1/4" small gold (brass-plated)  round Phillips-head screws. #2 screws have a thread diameter of .086". These are plated steel screws and are recommended for indoor use only.  These screws can be used for a number...

This is a two-pack of 8-32 (0.164" diameter) x 1 1/2" long black steel threaded rods, perfect for use as nuts on cigar box guitars with standard 1x2 necks. If needed, the grooves that you intend to run your strings through can be deepened a bit using a...

This is a two-pack of 5/16" x 1 1/2" stainless steel threaded rods, perfect for use as basic cigar box guitar nuts and bridges. If needed, the grooves that you intend to run your strings through can be deepened a bit using a hacksaw, if the strings...

This is a pack of 100 small black round-head Phillips screws. The nominal size is #2 x 5/16" (0.3125"), with a fairly small head. From the manufacturer they measure 2mm x ~8mm, but measure in a little smaller than that, with the thread measuring .077...

This is a two-pack of 1/2" (0.50" diameter) x 1 1/2" long black steel threaded rods, perfect for use as bridges on cigar box guitars with standard 1x2 necks. If needed, the grooves that you intend to run your strings through can be deepened a bit using a...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

This is a pack of 100 #4 x 1/2" brass-plated Phillips round-head wood screws. #4 screws have a thread diameter of .112". These screws are plated steel and are recommended for indoor use only. These screws can be used for all sorts of...

This is a two-pack of antique copper finish metal cigar box guitar neck braces, with included screws. These braces are a great decorative and sturdy way to attach your neck to the box, and can help reduce neck bowing.  The included screws...

This is a two-pack of 8-32 (0.164" diameter) x 1 1/2" long stainless steel threaded rods, perfect for use as nuts on cigar box guitars with standard 1x2 necks. If needed, the grooves that you intend to run your strings through can be deepened a bit using...

This is a two-pack of ZINC-PLATED metal cigar box guitar neck braces, with included screws. These braces are a great decorative and sturdy way to attach your neck to the box, and can help reduce neck bowing.  The included screws match the...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

This is a pack of 25 self-drilling "washer-head" screws - these have Phillips heads, are "#10" size, 3/4" long. The self-drilling capability, length and large flat head style make these screws perfect for use on cigar box guitars. We have found them...

This is a pack of 100 small Gold (brass-plated) round-head Phillips screws. The nominal size is #2 x 3/8", with a fairly small head. From the manufacturer they measure 2mm x 8mm, but measure in a little smaller than that. This is the same style of screw...

This is a pack of 8 smalkl brass-plated steel corner braces, perfect for bracing cigar boxes or adding a decorative element to most any corner. They are also great for helping keep cigar boxes closed!. Each leg is 3/4" long and they are 1/4" wide with...

This is a pack of 100 #2 x 3/8" Brass-plated Phillips Round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use only. #2...

This is a set of two small shiny brass butterfly-style hinges, with matching mounting screws. These are great for box making & woodcrafts, or for replacing the chintzy hinges that come on most cigar boxes. See the photo with the ruler for sizing...

This is a pack of 100 self-drilling "washer-head" screws - these have Phillips heads, are "#10" size, 3/4" long. The self-drilling capability, length and large flat head style make these screws perfect for use on cigar box guitars. We have found them...

This is a pack of 100 #4 x 1/2" Black-plated Phillips round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use only. #4...

This is a pack of 100 #2 x 1/4" silver (nickel-plated) Phillips round-head wood screws, the same type that we use with some of our chrome and nickel plated corners. These screws can be used for all sorts of CBG-building and general craft...

This is a pack of 100 #4 x 3/8" Brass-plated steel Phillips Round head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use...

Please note: the listing photos show the Phillips-head variety of these, but this listing is for the SLOTTED variety, to be installed using a standard flat-blade screwdriver. This is a pack of 100 #2 x 1/4" gold (brass-plated) slotted round-head wood...

This is a pack of 100 #5 x 5/8" Black-plated Phillips round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use only. #5...

This is a pack of 100 #2 x 3/8" Stainless steel Phillips Round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! These are a little more rugged than the plated-steel screws, but we haven't...

This is a pack of 100 #2 x 3/8" Brass-plated steel Phillips flat-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use...

This is a pack of 100 #6 x 5/8" Antique Brass (plated) Phillips round-head wood screws. These screws can be used for all sorts of woodworking, cigar box guitar building and general craft purposes! They are plated steel, and are recommended for...

This is a pack of 8 brass-plated steel corner braces, perfect for bracing cigar boxes or adding a decorative element to most any corner. Each leg is 1 1/4" long and they are 1/2" wide with two screw holes. We include brass-plated screws with these...

This is a pack of 500 #4 x 1/2" brass-plated Phillips round-head wood screws. #4 screws have a thread diameter of .112". These are steel plated screws and are recommended for indoor use only. These screws can be used for all sorts of...

This is a pack of 24 brass-plated steel corner braces, perfect for bracing cigar boxes or adding a decorative element to most any corner. Each leg is 1 1/4" long and they are 1/2" wide with two screw holes. We include brass-plated screws with these...

This is a pack of 100 #2 x 1/2" Stainless steel Phillips Round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! These are a little more rugged than the plated-steel screws, but we haven't...

This is a pack of 100 #6 x 1/2" gold (brass-plated) Phillips round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! These are plated steel screws, recommended for indoor use only. #6...

This is a pack of 100 #4 x 1/2" Brass-plated steel Phillips flat-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use...

This is a pack of 100 #4 x 1/2" zinc-plated steel Phillips round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use...

This is a pack of 100 #2 x 1/4" Stainless steel Phillips Round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! These are a little more rugged than the plated-steel screws, but we haven't...

This is a pack of 100 #4 x 1" Stainless steel Phillips Round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! These are a little more rugged than the plated-steel screws, but we haven't...

This is a pack of 100 #4 x 3/8" zinc-plated steel Phillips round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use...

This is a pack of 100 #4 x 1/2" zinc-plated steel Phillips Flat-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use only...