Craft Parts & Hardware

These are large plated metal #12 curtain grommets, with a full 1 1/2" wide inside diameter, and a substantial 2 1/2" total width, and are made from brass so they will not rust! Choose from seven...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are...

Now you can get a beautiful, great-sounding all-wood cigar box with a custom-printed top, using artwork (old photos, graphics, etc) that YOU provide! Build a truly unique guitar using these...

This is a set of 4 surface-mount box/panel corners, custom laser-engraved and cut from 1/8" solid genuine mahogany hardwood panels. Into each one is set a genuine U. S. "Indian Head" Nickel (also...

This is a set of 8 low-profile brass-plated box corners with matching screws (3 screws per corner). These are good for smaller boxes or for times when you want a smaller, less obtrusive box corner...

Brass-plated Phillips Round-head wood screws - choose from 100pc, 500pc and 1000pc bulk packs. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are...

These small screened grommets have an outer flange diameter of 15mm (0.59"), and are perfect for use as cigar box guitar inserts as well as other decorative woodworking uses. The outside diameter of...

These 1/4" inside-diameter vintage-style tuner bushings are great for use on guitars, banjos, cigar box guitars, dulcimers and any other stringed instrument that uses standard post-style tuners...

This is a two-pack of antique copper finish metal cigar box guitar neck braces, with included screws. These braces are a great decorative and sturdy way to attach your neck to the box, and can help...

This is a pack of 100 #4 x 1/2" Black-plated Phillips round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws,...

This is a set of two shiny nickel-plated 1" square hinges, with matching mounting screws (#4 x 3/8" Phillips round-head). Great for box making & woodcrafts, replacing the chintzy hinges that come on...

Now you can get our popular box kit with a custom-printed top, using artwork (old photos, graphics, etc) that YOU provide! Build a truly unique guitar using these great-sounding wooden boxes! This...