Craft Parts & Hardware

This is a pack of twenty-four (24) shiny black metal box corners, perfect for a wide range of craft and woodworking purposes. They also make GREAT accents for Cigar Box Guitars! The two "legs" of these box corners are about 1 1/4" long, and the...

This is a two-pack of 1/2" (0.50" diameter) x 1 1/2" long black steel threaded rods, perfect for use as bridges on cigar box guitars with standard 1x2 necks. If needed, the grooves that you intend to run your strings through can be deepened a bit using a...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

This is a bulk pack of 100 short-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decoration. The diameter of the top flange is 0.2", and the shank length under...

This is a pack of 4 #8 Brass rolled-rim grommets, perfect for use as sound hole inserts on cigar box guitars, and other craft purposes. These are made from thick, sturdy brass, and have a nice smooth rim due to the metal being "rolled" smoothly under the...

This is a bulk pack of 100 long-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decorative purposes. The diameter of the top flange is 0.2", and the shank...

This is a pack of eight (8) larger shiny Chrome-plated metal box corners, perfect for a wide range of craft and woodworking purposes. They also make GREAT accents for Cigar Box Guitars! These are a bit bigger than the other box corners we sell, at...

This is a matched pair of natural (unfinished) arctic birch plywood F-hole style sound hole covers, sized specifically to be perfect for use on cigar box guitars, but they can also work great for dulcimers, amplifiers, other homemade instruments, and...

This is a pair of cool sound hole covers cut and engraved with a distinctive skull design, perfect for use on cigar box guitars, dulcimers, amplifiers, other homemade instruments and more! The outside width of of these covers is 2" (50.8mm), and the...

This DIY box kit is easy to assemble, and perfectly sized for building a homemade license plate resonator guitar! They can also used for other craft purposes! This is a simple kit for easily constructing a plywood box sized 12.5" x 6.5" x 2.7".We...

This is a set of 24 classic-style shiny nickel finish metal press-fit tuner bushings, made to fit over a standard 6mm (.235") tuner shaft. These are great for new instrument work, but may not fit well into an existing bushing hole, if you are doing...

This is a pack of 100 #2 x 3/8" Brass-plated Phillips Round-head wood screws. These screws can be used for all sorts of CBG-building and general craft purposes! Because these are plated steel screws, they are recommended for indoor use only. #2...