Electronics Kits

This is a basic 2.5W Artec amp circuit board with on-board on/off/volume potentiometer, with an included 9-volt battery connector. We include a basic sheet with wiring diagrams for this board. These make a great little amp, which can be housed in a cigar...

If you have been wanting to try putting a piezo in your builds, but haven't been sure where to start, this is the kit for you! This is a kit of the parts and components you need to add an electric piezo pickup to your cigar box guitar. This is a perfect...

THE PSYCHO KNOB KIT: It's like injecting four different boost/distortion pedals inside your guitar or amp!   FOR GUITAR:  This simple knob requires only simple soldering to place between your volume/tone knobs and the guitar jack...

Well folks, if you've been looking at the absolute cheapest way to avoid soldering up your own pickup wiring circuits, here you go. This is the absolute rock-bottom economy-priced wiring harness you'll ever hope to find. It includes slim profile 250KOhm...

This is a super-affordable wiring harness for your cigar box guitar or other homemade instrument build. It includes full-size 500KOhm volume and tone pots (.047uF capacitor on the tone), a standard output jack, and leads. 500KOhm pots are often used with...

Due to unprecedented demand, we sold out of these in just a few days. We should have more in stock within a couple of weeks! Well folks, if you've been looking at the absolute cheapest way to avoid soldering up your own pickup wiring circuits, here you...

This is a super-affordable wiring harness for your cigar box guitar or other homemade instrument build, designed for switching between two separate pickups. It includes a standard 3-way switch, slim-profile 500KOhm volume and tone pots (.047uF capacitor...

Boost those bluesy mid-range tones.  Clean-up muddy sounding pickups. Crank up the treble for leads.  The Tone Distiller gives your pickups five different personalities. This unique active tone circuit opens up many possibilities by...