Decorative Hardware & Accents

These elegant and distinctive "Marquee-style" metal corners are a beautiful addition to any cigar box guitar, homemade instrument or other woodworking project. They can also be used as decorative corner protectors on kitchen cabinets, wooden boxes and...

These small trunk corners with matching screws (3 screws per corner) give a nice distinctive look to any box they are used on, and are perfect for cigar box guitars, cigar box amplifiers, jewelry boxes, cabinets, furniture and other wood box crafts...

This is package of 3 matched pairs (6 pieces total) of laser-cut hardwood F-hole cutouts, perfect for use as decorative embellishments on cigar box guitars and other instruments. Each one has two mounting holes, and you can place them over or near round...

This is a set of 4 shiny brass-plated medium-size trunk corners with matching screws (3 screws per corner). These give a nice distinctive look to any box they are used on, and are perfect for cigar box guitars, cigar box amplifiers, jewelry boxes...

This is a set of two shiny nickel-plated butterfly-style hinges, with matching mounting screws (#4 x 3/8" Phillips round-head). Great for box making & woodcrafts, replacing the chintzy hinges that come on most cigar boxes. With some drilling these...

This is a set of 8 low-profile brass-plated box corners with matching screws (3 screws per corner). These are good for smaller boxes or for times when you want a smaller, less obtrusive box corner. Each of the "legs" of the corner is about 1 1/4" in...

This is a pack of eight (8) large shiny plated metal box corners, perfect for a wide range of craft and woodworking purposes. They also make GREAT accents for Cigar Box Guitars! These are a bit bigger than the other box corners we sell, at about 1...

This is a set of two shiny nickel-plated 1" square hinges, with matching mounting screws (#4 x 3/8" Phillips round-head). Great for box making & woodcrafts, replacing the chintzy hinges that come on most cigar boxes. With some drilling these can also...

These vinyl sheets are perfect for cutting your own pickguards, headstock veneers or other decorative elements for homemade instruments and more! Made from a blend of PVC and celluloid and available in 3 classic colors, these sheets are 0.7mm thick and...

This is a set of two brass-plated box clasps with a nice latching/locking swivel feature. Matching screws are included for mounting. These catches come in two parts: the main latch portion that attaches to the lid of the box, and the lower "ring" portion...

This is a package of 2 laser cut and engraved hardwood "Made in the USA" badges, perfect for mounting on your cigar box guitar, other homemade instrument or woodcraft project. These are cut from 1/8" thick solid hardwood panels (not plywood) and measure...

This is a set of 12 laser-cut wooden gears, perfect for use as sound hole covers on cigar box guitars, steampunk projects and other decorative uses. The sizes of the gears range from 2.5" diameter down to .75" diameter, and several different gear styles...