Amp Accessories

These external-mount 9-volt battery trays are perfect for custom amplifiers, cigar box guitars with pre-amps or active circuits, and other electronics usage! Simply cut a rectangular hole in the side of your box, and use the included screws to mount...

Use these to connect your guitar to your amplifier! This is a nice basic black 3m (9.8ft) mono amp cord, perfect for plugging most any guitar into an amplifier, with plenty of length so you have room to move around. Best of all is the great low...

These battery holders are meant to be mounted on the exterior panel of a device (such as a guitar or cigar box amplifier), and allow a battery to be changed without having to open up the enclosure. This style allows the battery to lay flat, and requires...

These cables are made for connecting smart phones & MP3 players to guitar amplifiers and other devices that require a standard 1/4" mono input. They feature a stereo 3.5mm (headphone jack size) plug on one end and a 1/4" mono plug on the other...

This is a set of two nice metal holding clips for 9-volt batteries. They can be mounted in various ways, including gluing, screwing or even pop-riveting if you enlarge the holes a bit. these hold a standard 9-volt battery in a flat alignment to that it...

This is a cable made for connecting smart phones & MP3 players to other devices, including amplifiers/powered speakers, car stereo AUX jacks and more! They feature a stereo 3.5mm (headphone jack size) plug on each end and are one foot in length...

This is a set of eight (8) nice metal holding clips for 9-volt batteries. They can be mounted in various ways, including gluing, screwing or even pop-riveting if you enlarge the holes a bit. these hold a standard 9-volt battery in a flat alignment to...

This is a pack of 5 black metal perforated speaker covers, the same as we use in most of our own amplifiers. They are specially made to fit our 3-inch speakers. These can also be used for sound hole covers (the look great mounted inside the box so that...