Guitar & Instrument Parts

This is an all-wood bridge meant for conventional banjos, but they also work great for cigar box guitars!These bridges may come in slotted for 6-string, which will still work fine for 4-string instruments - just use the four middle slots, and either file...

This is a single black "rail style" humbucker pickup, with ferrite magnets and rated at 9.3KOhms of impedance. This is the style of pickup featured in Shane Speal's GuitarWorld.com article on his homemade lap steel guitar. Pop one of these in your...

This magnetic pickup harness combines some of our best-selling components into one handy pre-wired rig that you can easily include in your next cigar box guitar or other build! This harness features a beautiful gold enclosed single-coil pickup (our...

This premium JESCAR WIDE-MEDIUM nickel-silver fret wire is both beautiful and durable, a perfect finishing touch for your special build or re-fretting job! 18% nickel-silver is the most common material used for frets on modern guitars. This wire set...

This is a set of two nice metal holding clips for 9-volt batteries. They can be mounted in various ways, including gluing, screwing or even pop-riveting if you enlarge the holes a bit. these hold a standard 9-volt battery in a flat alignment to that it...

This is a set of 3 chrome-plated string retainers for guitar, cigar box guitar and more. These are used any time you want to pull the string height down before they cross the nut, to help with break angle and get better string tension. These are...

This is a pack of twenty-five chrome string ferrules, for use in electric guitars and also cigar box guitars. Mounted into a guitar body, they allow the strings to be run through and protect the wood from being gouged by them. We also carry these in 3...

This stainless steel fret wire is both beautiful and extremely durable, a perfect finishing touch for your special build or re-fretting job! Stainless Steel is just about the hardest type of fretwire you can get, and people who use it say it gives a...

These chrome dome knobs look great on guitars, amps, cigar box guitars and more! They are made to fit a 6mm or 1/4" potentiometer shaft, and feature a small set screw that can be tightened to secure the knob. This allows them to be used on the half-flat...

This premium JESCAR stainless steel fret wire is both beautiful and extremely durable, a perfect finishing touch for your special build or re-fretting job! Stainless Steel is just about the hardest type of fretwire you can get, and people who use it say...

This is a eight-pack of basic "Top Hat-style" black plastic volume knobs, made to fit a 6mm knurled potentiometer shaft. These all-plastic knobs do not have a set screw but rather are a press-fit variety. See the photo with the ruler for sizing reference.

These are meant for mounting under our 2.75-inch wide clear acrylic lap steel fretboards.