Other Hardware & Parts

This is a set of two stainless steel pickup rings sized specifically for the popular mini humbucker style of pickup (such as our Snake Oil pickups). These are cut from thin-gauge stainless steel sheet, and the result is a beautiful, Made-in-the-USA way...

This is a standard mono output/input jack pre-mounted into an ovoid-shaped jack plate with a shiny gold finish. Gold-plated screws are included for mounting. Use of a jack plate lets your jack work fine no matter how thick the panel you are mounting it...

Marking your slide cigar box guitar neck with fret locations has never been easier. Just peel off the backing, snug the front edge up against your nut, and push it down onto the neck. Voila, you've got 25-inch scale fret markings on your neck/fretboard...

These are meant for mounting under our 2.75-inch wide clear acrylic lap steel fretboards. 

This is a pack of three shiny gold ovoid-shape jack plates, with a flat profile that will work great on flat guitar surfaces and are especially good for use on cigar box guitars!  The overall length of the plate is 1.9" (48.3mm). and the width is 1...

Designed by the mad scientists of the Gitty Laboratories, these acrylic fretboards bring endless possibilities for customizing your Cigar Box Guitar! Swap underlay designs in and out to fit the season, your mood, or specific gigs - your creativity is the...

Add an awesome decorative fretboard to your fretless cigar box guitar, and show your pride in the USA at the same time! Just peel off the backing, snug the front edge up against your nut, and push it down onto the neck. Voila, you've got a perfectly...

This is a bulk pack of 100 long-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decorative purposes. The diameter of the top flange is 0.2", and the shank...

This is a set of two laser-cut pickup rings sized specifically for the popular "Lipstick Tube" style of pickup. We cut these from 1/8" thick solid hardwood panels, and the result is a beautiful, Made-in-the-USA way to add a touch of class to your...

This is a set of 6 classic style shiny nickel finish metal press-fit tuner bushings, made to fit over a standard 6mm (.235") tuner shaft. These are great for new instrument work, but may not fit well into an existing bushing hole, if you are doing repair...

This is a bulk pack of 100 short-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decoration. The diameter of the top flange is 0.2", and the shank length under...

This is a set of two laser-cut pickup rings sized specifically for our "Foundry-Tone Single-Coil" style of pickup. We cut these from 1/8" thick solid hardwood panels, and the result is a beautiful, Made-in-the-USA way to add a touch of class to your...