Description
These classy little humbucker assemblies are very affordable and boast a rich, warm tone.They come pre-mounted in their pickup rings so all you have to do is cut a hole, drop them in and wire them up!
To wire these treat the black wire as your positive and the white wire as your negative/ground, and tape the twisted green & red wires off to the side. These wires are used to split the coils individually. We haven't really explored this option, so we do not have a diagram available for this!
Impedance = ~7kOhm
Per Coil: ~3.5kOhm
Dimensions (With ring):
Width: 3 11/16"
Height: 1 1/2"
Depth: 3/4"
Mounting holes Width: ~3 1/4"
Height: ~1 3/16"