- Fun Stuff & Misc.
- Made in the USA
- "WickedBucker" Flat Hand-Wound Surface-Mount Pickups for 3 or 4-string - Choose Cover Style!
"WickedBucker" Flat Hand-Wound Surface-Mount Pickups for 3 or 4-string - Choose Cover Style!
NO ROUTING. NO STRING SPACING PROBLEMS. PURE TONE...
The Wickedbucker: the surface-mount guitar pickup are based on an original design by Elmar Zielhofer and brought to America by the late Dan Sleep. Our friend Marty Tauber hand-winds each of these pickups, on a rig he designed himself, in his Maine Made CBG workshop in Biddeford, Maine.
These pickups are surface mount, and are only 1/4" thick, making them the perfect solution for builders that want the versatility of a magnetic pickup without the usual modifications to the box and neck. Installation is as easy as positioning it on your instrument and drilling holes for the wires and the screws, feeding the wire through and soldering the 12" leads to a jack.
The surface mounting is very easy - just back out the small screws, place on your box top, and then drive the screws down into it.
Color: Aluminum, Copper or Brass
Impedance: ~2 kOHM
Width: 2 1/4"
Height: 1 7/8"
"DeltaBucker" 3-string Maple Cigar Box Guitar Humbucker Pickup pre-wired with Jack - No Soldering Required
Customers Also Viewed
C. B. Gitty
C. B. Gitty