6-piece sets of sealed-gear guitar tuners with classic "half moon" (or Lima bean) style tuner buttons, set up for "3 Left/3 Right" configuration on the headstock. Choose chrome, gold or black finish. These tuners feature screw-in style bushings...

These vintage-style "lipstick tube" pickups are a great addition to any guitar or cigar box guitar build. Mounting mounting hardware (springs and screws) included. These are rated at an impedance of 4.73KOhm by the manufacturer. These are...

If you dare to shove a pair of these on your volume and tone pots, then all bets are off! We assume no liability for unexpected mojo, hoodoo or joo joo. We have heard reports that these knobs may impart supernatural boogie capabilities. ...

These are large plated metal #12 curtain grommets, with a full 1 1/2" wide inside diameter, and a substantial 2 1/2" total width, and are made from brass so they will not rust! Choose from seven different finishes and two pack sizes. These grommets...

This is a matched set of Black Stratocaster(tm)-style humbuckers (double-coil magnetic pickups), with mounting machine screws and springs. These humbuckers are meant to be mounted one up towards the neck and one down towards the bridge of an electric...

These four-pole single-coil enclosed pickups were originally intended for bass guitars, but are also perfect for Cigar Box Guitars! This pickup has two leads (red=positive and black=negative), as well as black mounting screws. These can be used...

These cool little single-coil pickups feature shiny plated metal covers, available in either Chrome or Gold. The pickups include two springs and chrome mounting screws. These are rated at 5.68KOhm resistance, use a plastic bobbin and ferrite magnets...

These classic "cup-style" string ferrules are intended for use in electric guitars and also cigar box guitars. Mounted into a guitar body, they allow the strings to be run through and protect the wood from being gouged by them. Choose your desired finish...

#2 x 1/4-inch small gold (brass-plated)  round Phillips-head screws - choose from 100pc, 500pc and 1000pc bulk packs. #2 screws have a thread diameter of .086". These are plated steel screws and are recommended for indoor use only...

These distinctive reproduction potentiometer knobs are patterned after the famous Gibson-brand "Speed Knob" style. The body of the knob is clear plastic with the number indicators on the base visible through it. These are all-plastic knobs made...

This is a 2.5-watt Artec amp circuit board with on-board on/off/volume potentiometer, pre-wired connection leads including a 9-volt battery connector. We also include a basic sheet with wiring diagrams for this board. These make great little amps, which...

  This is a kit of all of the parts you'll need to build your own 2.5-watt amplifier, whether in a cigar box or other enclosure of your choice. For such a small amp board, this little beauty really puts out some nice sound. This kit includes a...