KITS: Guitar Kits, Amp Kits & More

Turn antique packing crates, trunks and boxes into amazing, fully playable heirloom instruments! Using his 3-string short-scale "Baker's Friend" guitar as a build example, author Ben "Gitty" Baker walks you through every facet of the process,...

This is a set of two (2) paper-cone audio speakers, rated at 3 watts and 8 ohm resistance. While not full range, these are good inexpensive workhorse speakers for various audio projects, including cigar box amplifiers. Their low profile (just over 1 inch...

This parts pack includes an awesome premium cigar box and all of the GOLD hardware you need to build a rockin' HOT ROD 3-string electric cigar box guitar! No more do you need to worry about finding all of the separate parts (often in quantities you...

This is a set of two (2) rectangular full-range amp speakers, measuring 2 inches tall by 4.375 inches wide and just under 2 inches deep. Rated at 10 watts with 8 ohms of impedance, these are perfect for use in homemade amplifier building. They have a...

Make a guitar out of pickaxes, shovels, boat oars and other weird objects!  Shane Speal hand-picked these parts specifically for experimental guitar design.  This parts pack includes all of the hardware you need to build a mutant 3-string...

A set of five 1/4" audio jacks, with 4 contact lugs. These are stereo jacks and also have a cut-off circuit, which allows them to be used in situations where you want a circuit to only be powered when a plug is inserted - this is commonly used for...

Here are all of the parts you need to build a 2x4 Strummer Guitar following Ben Gitty's how-to plans. Includes: 3 open-gear tuners & mounting hardware (2 right/ 1 left alignment) 3-string Set of Open G G-D-G strings for 23-inch scale 6 chrome...

We've always been fans of the cowboy guitars with painted graphics that were sold in the 1930's-1950's.  Our Rodeo King pays homage to those instruments, while delivering a rough-and-tumble look of modern ranch life.  This guitar would look...

These are great-sounding full-range audio speakers, rated at 5 watts and with 4 ohms resistance. They come with standard 1/8-inch blade-style solder lugs for easy wiring, utilize ferrite magnets. The design of the mounting flange means that they can be...

These cute little tweeters make a great addition to homemade amps, for pulling out those high-ends. They are rated at 13 watts and with 6 ohms impedance. They come with standard 1/8-inch blade-style solder lugs for easy wiring, and also have a third lug...

This oval-shaped 5 x 7-inch speaker boasts a full & rich frequency range, perfect for homemade guitar amplifiers and other audio uses such as powered speakers. While a little more expensive than smaller speakers, the volume and tonal quality more...

A set of two mini full-range mylar-cone speakers. These are 2 inches in diameter, and perfect for use in homemade amplifier building. This is the same style of speakers used in the famous "Smokey" cigarette pack amps, and can be used with our SDA-T amp...