Other Hardware & Parts

Guitar string retainers such as these are used any time you want to pull the string height down before they cross the nut, to help with break angle and get better string tension. Choose your desired style and finish color from the available options...

This is a set of 25 long-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decorative purposes. The diameter of the top flange is 0.2", and the shank length...

This is a set of 25 short-shank brass eyelets, perfect for use as economy string ferrules on a cigar box guitar or other handmade instrument. They can also be used for decoration. The diameter of the top flange is 0.2", and the shank length under the...

These decorative tailpieces were designed for use on a mandolin, but are also perfect for cigar box guitars! Choose either chrome or gold finish. As shown in the listing photos above, beneath the removable faceplate cover are pegs meant for loop-end...

This is a standard mono output/input jack pre-mounted into an ovoid-shaped jack plate with a shiny chrome finish. Chrome-plated screws are included for mounting. Use of a jack plate lets your jack work fine no matter how thick the panel you are mounting...

This is a pack of 12 narrow-diameter string ferrules, great for use on guitars, cigar box guitars and more. Choose from Chrome, Gold and Black finishes. Please refer to the photo with the ruler for an idea of the size of these. The string hole is big...

Perhaps the most important aspects in headstock construction, is getting the proper break angle for the strings to get to the nut. One of the easiest ways to do this is with a string retainer bar like this one. These bars are 1.65 inches / 42mm in...

This is a pre-wired harness for selecting between two pickups on an electric guitar. It includes a volume and tone pot with knurled chrome knobs, a 0.047uf capacitor soldered to the tone pot, and a 3-way selector switch. All of the components are mounted...

This is a 3-pack of chrome recessed jack plates, perfect for mounting a jack into the side of a guitar or cigar box guitar body. Please note that the jack is not included in this offer, the picture showing the installed version with the jack is for...

These stainless steel tailpieces were designed specifically for use on 3 and 4-string Cigar Box Guitars. Available in a range of elegant designs, these tailpieces feature 3 evenly spaced string holes and pre-formed mounting holes, making them even easier...

This is a pack of three glossy black ovoid-shape jack plates, with a flat profile that will work great on flat guitar surfaces and are especially good for use on cigar box guitars! The overall length of the plate is 1.9" (48.3mm). and the width is 1...

This is a pack of 8 thin plywood retainer nuts, intended for use on 3-string cigar box guitars (and other homemade instruments) with recessed headstocks and zero frets. See the listing photos for an idea of how these are intended to be mounted. These...