Pre-Wired 4-String Single Coil Pickup Harness with Volume and Tone - Perfect for Cigar Box Guitars
If you have been looking for a quick, easy way to bring classic electric guitar sound to your 3 or 4-string cigar box guitar, then look no further!
This is an amazing little pre-wired magnetic pickup harness intended for 4-string instruments, ready to mount in your cigar box guitar or other stringed instrument without any need to solder or worry about wiring schematics. This harness features a special single coil pickup with a flanged black plastic base plate that makes it easy to surface mount on your build (you will still need to cut a hole in the surface to accommodate the bottom of the pickup). The pickup is wired to 500KOhm mini tone (with capacitor) and volume pots, and from there to the mono output jack. Black plastic Tone and Volume knobs are included along with mounting hardware for good measure. Please note that the pickup itself is actually a modified 6-pole pickup, with a 4-pole cover and special magnet arrangement to "hide" two of the poles.
Best of all about this deal is the PRICE! Just imagine what it would cost to get all of the necessary parts separately to put this together... not to mention the time! You simply cannot go wrong with this low-cost setup.
Click here for a how-to guide covering how to install this pickup harness in a cigar box guitar.
The distance (center to center) between pole 1 and pole 4 is: 1.125 inches
The distance from pole to pole (center to center) is .38 inches
Length of the pickup housing (the part that raises and lowers) is 2.78 inches.
Overall length of the mounting flange is 4.81”
Width of the mounting flange is: 1.25”