- Fun Stuff & Misc.
- Made in the USA
- 2pc. "Electric Delta" Pickup Rings - fits both the 3 and 4-string models!
2pc. "Electric Delta" Pickup Rings - fits both the 3 and 4-string models!
This is a set of two laser-cut pickup rings sized specifically for the popular "Electric Delta" 3-pole and 4 pole style of pickup. We cut these from 1/8" thick American-made Birch Plywood panels, and the result is a beautiful, Made-in-the-USA way to add a touch of class to your pickup installs. No more do you have to worry about getting the opening hole exactly right and the edges perfect... just cut/route your hole install the pickup and then snug one of these down over it.
The outer dimensions of these rings are 3 1/2" wide by 1 3/8" tall. The thickness is 1/8". The opening is 2" by 11/16", which fits very nicely over the top plate of our 3-string and 4-string Electric Delta pickups. These rings have two holes for mounting, but we do not include screws. You can use either round-head screws or flat-head screws (careful countersinking recommended if you want to use flat-head screws). We ship these in the bare/natural wood state, which gives you the option to really match it closely to your build via staining, painting or other finishing.
Because these parts are cut by a laser, the edges will have some darkening. You can sand this off if desired, but it really isn't necessary.
"DeltaBucker Deluxe" 3-string Maple Cigar Box Guitar Humbucker Pickup pre-wired with Volume & Tone - No Soldering
"DeltaBucker" 3-string Maple Cigar Box Guitar Humbucker Pickup pre-wired with Jack - No Soldering Required
C. B. Gitty
Customers Also Viewed