C. B. Gitty
GittyBucker Low-Profile Cover Rings - Choose Cover Material!
- SKU:
- 51-133-01
- UPC:
- 602589226354
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
Buy 10 or above | and get 15% off |
Description
We created these 2-part pickup rings and cover assemblies here at C. B. Gitty specifically for mounting our hand-wound GittyBucker surface-mount cigar box guitar pickups! They measure 2.3 in. x 2.3 in. by ~0.18 in. (4.5mm) tall when fully assembled. The GittyBucker pickup nestles down into the ring and the cover plate goes over it, held down to your guitar soundboard via four screws (not included - #4 X 1/2 in. Phillips flat-head or round-head recommended).
One of the best things about these covers, in addition to their low price and the fact they are made in the USA here at C. B. Gitty*, is the fact that they are so versatile in how you can decorate them. For the wooden covers, which come in an unfinished/natural state, anything from spray paint to wood stain can be used, and you can even do woodburning, hand-painted artwork, decoupage, whatever you want! For the metal covers, you can distress them, antique them or polish them to a mirror shine if desired.
Please note this listing is for a single pickup mounting ring and cover of your chosen style; the GittyBucker pickups shown in photos are for demonstration purposes only! Metal finishes come "natural" - in other words, unfinished as they came from the factory. Metal plates may have sharp edges and surface scuffs/scratches that need to be polished/sanded off. Use fine grit sandpaper for a nice textured finish, or steel wool/buffing cloths for more shine.
* We make the plywood spacer rings and cover plates here at C. B. Gitty. The metal cover plates are made off-site at another facility in the USA.