Basic Pre-Wired Piezo & Jack Harness with Shielded Cable
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
|Buy 10 or above||and get 15% off|
Here is the perfect option for builders who want to put a basic piezo pickup in their builds, but don't want to be bothered with the headaches that come with sourcing the individual parts, let alone soldering and wiring them. This is a pre-wired, pre-soldered piezo & jack harness that makes it simple for you. All you have to do is attach the piezo in or on your build, drill a hole and mount the jack, and you're done! The 12" leads give you plenty of lee-way to mount the piezo and jack where you want them as well.
The jack is a Neutrik 1/4" long-shaft phone jack, with a 9.5mm threaded shaft, which is GREAT for getting through the side of thicker cigar boxes, when compared to standard 6.5mm shafts. The piezo is a high-quality 20mm Murata piezo transducer, and the lead is a two-conductor shielded cable that can help reduce feedback and interference.
It doesn't get much easier than this, folks! These are high-quality harnesses assembled in the USA by C. B. Gitty Crafter Supply, so you know you're getting the good stuff.
Be sure to check out this article on how to best make use of this product. We also have this article on piezo placement and mounting methods if you want more info on the best ways to handle that.