C. B. Gitty
Easy-Install 3-piezo Endpin Jack Harness - No soldering required!
Here's a great way to add a pickup to your cigar box guitar or other homemade instrument build! This harness has three piezo disks with adhesive backing, so you can position them around the underside of your soundboard to dial in the best tone. No soldering required, just drill a hole for the endpin jack, screw the faceplate back on, stick on the piezo disks and you're good to go! Note that some additional cushioning of the piezo disks (such as covering them with hot glue), is often recommended to help improve the overall sound. The piezo disks are 30mm in diameter and the cables connecting them to the jack are over a 15 inches long, giving you plenty of slack to work with for optimal placement. A self-adhesive cable tie-down and zip tie are included to help secure excess cable.