Other Guitar & Instrument Parts

Great for new instrument fret-work and repair work on mandolins, banjos, dulcimers, cigar box guitars and more! This fret wire is silimar to Stewart-MacDonald's Narrow/Low #764. This is a nice set of just under 6...

This is a laser-cut biscuit bridge designed specifically for use on the Charles Atchison 5.5-inch "Lightning" resonator cones that we sell. These are the acoustic version of the biscuit bridge with no embedded pickup. They are 1 1/2" in diameter and...

These poplar guitar necks are hand-made in the C. B. Gitty workshops in the state of New Hampshire, USA, and we work hard to make sure they are a high-quality product! We use these same necks on our Pure and Simple Kit. They were designed for the...

These cool little single-coil pickups feature shiny plated metal covers, available in either Chrome or Gold. The pickups include two springs and chrome mounting screws. These are rated at 5.68KOhm resistance, use a plastic bobbin and ferrite magnets...

These decorative tailpieces were designed for use on a mandolin, but are also perfect for cigar box guitars! Choose either chrome, gold or black finish. As shown in the listing photos above, beneath the removable faceplate cover are pegs meant for...

These are black plastic potentiometer knobs, in the classic "chickenhead" pointer design. They include a set screw and are intended for use on shafts that have a flattened area for best results. You may need to file a flat are into a knurled shaft...

These stainless steel tailpieces were designed specifically for use on 3 and 4-string Cigar Box Guitars. Available in a range of elegant designs, these tailpieces feature 3 evenly spaced string holes and pre-formed mounting holes, making them even easier...

6-piece sets of beautiful sealed-gear guitar tuners, available in chrome, gold and black and either 3-left/3-right or 6-in-a-line-Right alignment. The buttons of these tuners are the vintage "tombstone" shape, such as is seen on Wilkinson(tm) brand...

Select your desired wood type and fretting options above. These custom, American-made fretboards are designed specifically for use on cigar box guitars with necks 1 1/2" wide. The fretboard is 20 3/8" long, 1/4" thick and has 20 frets, spaced for a 23"...

This is a stereo chrome-plated end pin/strap button jack perfect for use in guitars, cigar box guitars, and many other instrument and audio projects. This jack is intended to be mounted through the base of a hollow-body acoustic or acoustic/electric...

These are standard mono output/input jacks pre-mounted into an ovoid-shaped jack plate with a shiny chrome or gold finish. Matching screws are included for mounting. Use of a jack plate lets your jack work fine no matter how thick the panel you are...

Shane says:  "When Southbound Strings asked me to develop a set of professional electric guitar strings for cigar box guitar, I demanded three things: The strings must include a ‘wound G’ string (essential for grinding slide...