Other Guitar & Instrument Parts

These are 20mm (0.787") disk piezos, to which we have soldered a ~12-inch shielded cable lead. These longer leads prevent you from having to extend/replace the shorter leads that come on the standard 20mm piezos we sell, which can be a big timesaver...

These poplar Canjo necks are hand-made in the C. B. Gitty workshops in the state of New Hampshire, USA, and we work hard to make sure they are a high-quality product! We use these same necks on our own various canjos as well as in our Complete Canjo Kit...

This is a pre-wired PAIR of four-pole single-coil enclosed pickups, originally intended for bass guitars, but also perfect for Cigar Box Guitars! This pickup pair is pre-wired with leads in series, and has two leads coming off of the set...

This is a set of two handcrafted hardwood cigar box guitar bridges, designed by C. B. Gitty specifically for use on "stick on box" cigar box guitars. We call this model the "Flying Bridge" because it goes up an over a standard 3/4" x 1 1/2" cigar box...

These bone saddle blanks are fabricated from bleached white cow bone, and are intended to be used as saddles on cigar box guitars and more! They are a perfect match for our bone nut blanks.Dimensions:Length: 2 1/16 in. (50.5mm)Height: 3/8 in. (9...

Marking your slide cigar box guitar neck with fret locations has never been easier. Just peel off the backing, snug the front edge up against your nut, and push it down onto the neck. Voila, you've got 25-inch scale fret markings on your neck/fretboard...

These give you complete control over how many strings your instrument will have, and how they will be spaced and placed. Each bridge section doubles as both "top-loading" (strings through the back of the bridge) and bottom loading (through the bottom of...

Ben Gitty says: "There is no one on earth better qualified than Shane Speal to write the book on cigar box guitars and handmade instruments. He has been living, eating and breathing this subject for 25 years, and all of that passion, study and...

These basic 3-way and 5-way toggle switches are used for selecting between different pickups on a guitar. There are seven solder lugs coming off the bottom of the switch, and a single solder lug coming off the side. Please review the wiring diagrams...

This premium Jescar 18% nickel-silver fret wire is both beautiful and durable, a perfect finishing touch for your special build or re-fretting job! With its wider crown width and significantly higher crown height than standard "medium" fret wire, you can...

These distinctive reproduction potentiometer knobs are patterned after the famous Gibson-brand "Speed Knob" style. The body of the knob is clear plastic with the number indicators on the base visible through it. These are all-plastic knobs made...

Add an awesome decorative fretboard to your fretless cigar box guitar, and show your pride in the USA at the same time! Just peel off the backing, snug the front edge up against your nut, and push it down onto the neck. Voila, you've got a perfectly...