Other Guitar & Instrument Parts

Get the classic B-Bender sound on guitars that have top-loading Hard Tail bridges.  No drilling required.  Easy installation.  Each unit allows players to pull a note one full step up, just like the pedals of a steel guitar. These are...

This is a stainless steel pet dish, very much the same as could be bought (at a higher cost) in many pet supply stores. They have a much better use than for providing water to pets, however: they are of a perfect size and temperament for use as resonator...

This is a set of 4 ukulele tuners with a chrome finish. These are meant for mounting through the headstock from back to front (with the tuner buttons on the back of the headstock), as opposed to the "right angle" style of guitar tuners. These are...

This is a two-pack of nice narrow-profile short-shaft 250KOhm pots, perfect for use as volume controls in a guitar, amp or cigar box guitar! As you can see from the photos, these are narrow-profile pots with a 15mm base. These pots have standard-length...

This is a set of two chrome or gold-plated guitar neck mounting cover plates, with four matching mounting screws per plate. These consist of a black plastic backing which the chromed metal plate seats into, to help protect the guitar's finish. These...

These jumbo-sized 41mm piezo elements feature 4-inch pre-wired with leads to save you having to solder the leads on yourself. These can be used in cigar box guitars, foot stompers and other home-made instruments. They can also be used for custom pickup...

These classic "cup-style" string ferrules are intended for use in electric guitars and also cigar box guitars. Mounted into a guitar body, they allow the strings to be run through and protect the wood from being gouged by them. Choose your desired finish...

We are proud to offer this new design of easy-to-use hardtail bridges designed by Ben "Gitty" Baker specifically for cigar box guitars. These are single-piece, "fixed saddle" style bridges, which can be easily mounted to the top of your cigar box guitar...

These small screened grommets have an outer flange diameter of 15mm (0.59"), and are perfect for use as cigar box guitar inserts as well as other decorative woodworking uses. The outside diameter of the "shaft" portion of these grommets (the part that...

This is a matched pair of natural (unfinished) arctic birch plywood F-hole style sound hole covers, sized specifically to be perfect for use on cigar box guitars, but they can also work great for dulcimers, amplifiers, other homemade instruments, and...

These are pairs of stylish plated jack plates, for use on Cigar Box Guitars and other homemade instruments.  The jack plates measure 1 5/16 inches on each side and are 3/32-inch thick. they are designed to fit a jack with a standard 3/8-inch shaft,...

These 1/4" inside-diameter vintage-style tuner bushings are great for use on guitars, banjos, cigar box guitars, dulcimers and any other stringed instrument that uses standard post-style tuners. These can be used for new instrument building work or...